I realized that it would be very easy and straightforward to add a third camera to the Sabre. The camera switcher is 3 position, I have a 3rd FPV camera, and the Sabre already has a spot to put a camera in the belly. I used my Runcam PZ0420H CCD camera in the recess in the belly of the Sabre.
To do this, all I had to do was make a small hole to route the wires up to the
electronics section, to plug into the camera switcher.
 |
| I used Velcro to secure the camera. |
 |
| Paper towels were used to snug the fit to help prevent vibration or dislodging. |
 |
| I made a simple cardboard cover. Packaging tape holds it in place. |
No comments:
Post a Comment